| Specification
|
| Interfaces
|
16*10/100/1000Mbps POE ports（Data/Power)
2*10/100/1000M uplink RJ45 ports (Data)
|
|
Main functions
|
Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging
|
|
Standards
|
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control
|
|
Modes
|
Normal switch mode/Extend mode
|
|
Transfer rate
|
Etherent: 10Mbps (Half-duplex); 20Mbps (Full-duplex)
Fast Entherent: 100Mbps (Half-duplex); 200Mbps (Full-duplex)
|
|
Store & Forwarding
|
Yes
|
|
Switching Capacity
|
9.2G
|
|
MAC Address
Table Size
|
8192
|
|
Jumbo Frame
|
2048 byte
|
|
Operating parameters
|
Operation Temperature：0℃～40℃
Storage Temperature：-40℃～70℃
Operation Humidity：10%～90% RH Non-condensing
Storage Humidity：5%～90% RH Non-condensing
|
|
Power Input POE
Standards
|
Single port maximum power 30W,
Whole switch maximum power 240W
Support over-current,over-voltage and short-circuit protection
Support Soft Start of High Power PD
Support sequential boot-up
Power Supply Pin:12+/36-
AC 110~240V 50/60HZ
|
|
Cabling type
|
100Base-TX: Cat 5e or better UTP/STP(≤100m)
10Base-TX: Cat 5e or better UTP/STP(≤250m)
|
|
Dimensions
(L x W x H )
|
280mm*180mm*43mm
|
Global (English)